Here are all the boards I’ve made. The first is at the top, second in the middle and the last one at the bottom.


The one on the bottom needs to goo through the planer a few more times, but I think it looks pretty good. So lesson learned…cut off the bad parts before gluing anything together. Unfortunately, that last board went through the planer really slowly. I’m wondering if that’s a sign that the blades are getting dull. I’ll try it again tomorrow and see how things go.

These three boards are ~3.5 to 4′ long and about 5″ wide. That was just an easy size to do. However, now I should start thinking about what I want to build and how big I should make the boards to do what I want.