Since my corners are not so good, I’ve decided that I need to make around 50 napkins with mitered corners for practice. I found a YouTube Video on Sewing Mitered Corners to try to follow. The pictures below are from my first attempt. It’s lousy. Though I thought I was very careful to iron and measure things. I also took my time and sewed as instructed, but when I tried to lay the seam flat, the mitered corners just didn’t line up properly. So perhaps I need to find a book or something with more detailed instructions. Or I just need to practice and come up with my own system. Anyway, this is why I’m practicing. The other problem I had was that I must have mismeasured something. My intent was to make a 16″ square napkin. I wanted the edge to be 1/2″. And according to the video, I also need an extra 1/2″ folded under first. So I think that means I need an extra 1″ all around. I cut the square at 18″. But when I measured the final napkin, it’s more like 15″ square. So I guess I didn’t measure as perfectly as I thought. Oh well.
Here is napkin #1.